<center id="n5so2"></center>
<cite id="n5so2"></cite>
    <strong id="n5so2"><object id="n5so2"></object></strong>
    <dd id="n5so2"></dd>
    1. <object id="n5so2"></object>

      DIP-DC.CAP

      Ceramic Capacitor
      溫度特性(Temperature characteristic):SL、B、E、F; 容量偏差(Tolerance):J(±5%)、K(±10%)、M(±20%); 耐電壓(Voltage):1500VDC; 絕緣電阻(Insulation resistance):≥4000MΩ; 阻燃等級(Passive flammability):B;

      PDF下載

      說明


      model and size code

      產品型號

      尺寸代碼

      VDC

      額定直流電壓

      Nominal capacitance標稱電容量

      Size尺寸(mm)

      電容量溫度系數組別

      Dmax

      Tmax

      F

      d

      ±0.05

      CH(NP0)

      UJ

      SL

      CC1-05

      50V

      0P5~560

      0P5~820

      180~221

      5.5

      4.0

      5.0

      0.45

      CC1-06

      620~101

      101

      221~271

      6.5

      4.0

      5.0

      CC1-08

      111~151

      121~151

      301~431

      8.0

      4.0

      5.0

      CC1-10

      181~271

      181~331

      471~681

      10.0

      4.0

      5.0

      CC1-12

      301~391


      751~102

      12.5

      4.0

      5.0

      CC1-05

      500V

      0P5~330

      0P5~390

      180~121

      5.5

      4.0

      5.0

      0.45

      0.55

      CC1-06

      360~560

      400~680

      121~151

      6.5

      4.0

      5.0

      CC1-08


      820~101

      181~271

      8.0

      4.0

      5.0

      CC1-10


      121~151

      331~471

      10.0

      4.0

      5.0

      CC1-12


      181~221

      561

      12.5

      4.0

      5.0

      CC81-06

      1KV

      0P5~220

      0P5~330

      180~101

      6.5

      4.0

      5.0

      7.5

      10.0

      0.45

      0.55

      CC81-08

      270

      390~680

      151~181

      8.0

      4.0

      CC81-10

      330~680

      820~151

      221471

      10.0

      4.0

      CC81-12

      820~271

      181~271

      561

      12.5

      4.0

      CC81-06

      2KV

      0P5~270

      0P5~330

      4R0~680

      6.5

      5.0

      5.0

      7.5

      10.0

      0.45

      0.55

      CC81-08

      300~680

      470~560

      820~101

      8.0

      5.0

      CC81-10

      820~101

      680~101

      121~271

      10.0

      5.0

      CC81-06

      3KV

      2P0~120

      2P0~220

      2P0~220

      6.5

      6.0

      7.5

      10.0

      0.55

      CC81-08

      150~220

      250~300

      250~330

      8.0

      6.0

      CC81-10

      240~330

      330~390

      390~560

      10.0

      6.0

      CC81-12

      470


      680~820

      12.5

      6.0

      CC81-14



      101~221

      14.0

      6.0

      CC81-16

      101



      16.0

      6.0

      CC81-06

      6KV

      2P0~120

      2P0~150

      2P0~150

      6.5

      7.0

      7.5

      10.0

      0.55

      CC81-08

      150~220

      180~220

      180~270

      8.0

      7.0

      CC81-10

      240~330

      240~270

      300~390

      10.0

      7.0

      CC81-12

      470


      470~680

      12.5

      7.0

      CC81-14



      820~151

      14.0

      7.0

      CC81-16

      101



      16.0

      7.0

      model and size code

      產品型號及尺寸代碼

      VDC

      額定直流電壓

      Nominal capacitance標稱電容量

      size尺寸(mm)

      Temperature coefficient of capacitance group電容量溫度系數組別

      Dmax

      Tmax

      F

      d

      ±0.1

      2B/2X

      LR

      BN

      2E

      2F

      CT1-05

      50V

      101~152

      /

      /

      222~502

      102~103

      5.5

      4.0

      5.0

      0.45

      CT1-06

      182~332

      /

      /

      822~103

      103

      6.5

      4.0

      5.0

      CT1-08

      392~562

      /

      /


      103~153

      8.0

      4.0

      5.0

      CT1-10

      682

      /

      /


      153~223

      10.0

      4.0

      5.0

      CT1-12

      822~103

      /

      /



      12.5

      4.0

      5.0

      CT1-05

      500V

      101~561

      /

      /

      102~222

      102~332

      5.5

      4.0

      5.0

      0.45

      0.55

      CT1-06

      681~122

      /

      /

      272~392

      392~562

      6.5

      4.0

      5.0

      CT1-08

      152~272

      /

      /

      472~682

      682

      8.0

      4.0

      5.0

      CT1-10

      332~392

      /

      /

      103~123

      822~103

      10.0

      4.0

      5.0

      CT1-12

      472~682

      /

      /


      123~223

      12.5

      4.0

      5.0

      CT1-14

      822~103

      /

      /


      333

      14.0

      4.0

      5.0

      CT81-06

      1KV

      101~681

      101~471

      101~102

      821~222

      102~272

      6.5

      4.0

      5.0

      0.45

      CT81-08

      821~152

      561~102

      102~182

      272~392

      332~682

      8.0

      4.0

      CT81-10

      182~222

      122~182

      222~332

      472~682

      103

      10.0

      4.0

      CT81-12

      272~472

      22~2272

      392~472

      822~103

      103

      12.5

      4.0

      7.5

      10.0

      0.55

      CT81-14

      562

      332~392

      562


      223

      14.0

      4.0

      CT81-16

      682

      472

      682



      16.0

      4.0

      CT81-18

      103


      103


      333473

      18.0

      4.0

      CT81-06

      2KV

      10~1471

      151~331

      101~561

      102~122

      102~222

      6.5

      5.0

      5.0

      0.45

      CT81-08

      561~102

      391~561

      681~102

      152~222

      272~332

      8.0

      5.0

      CT81-10

      122~181

      681~102

      122~152

      272~392

      392~562

      10.0

      5.0

      CT81-12

      222~272

      122~152

      182~272

      472~682

      682~103

      12.5

      5.0

      7.5

      10.0

      0.55

      CT81-14

      332~392

      222

      332

      103

      103

      14.0

      5.0

      CT81-16

      472

      272~332

      392~472


      153

      16.0

      5.0

      CT81-18

      562~682

      392

      562~682


      223

      18.0

      5.0

      CT81-06

      3KV

      101~331


      101~331

      102

      102~152

      6.5

      6.0

      7.5

      10.0

      0.55

      CT81-08

      391~561

      151~331

      391~471

      122~152

      182~222

      8.0

      6.0

      CT81-10

      681~102

      391~681

      681~122

      182~272

      272~392

      10.0

      6.0

      CT81-12

      122~182

      821~102

      152~182

      332~472

      472~682

      12.5

      6.0

      CT81-14

      222


      222~272

      562~682

      103

      14.0

      6.0

      CT81-06

      6KV

      101~271

      /

      101~221

      471~561

      102

      6.5

      7.0

      7.5

      10.0

      0.55

      CT81-08

      331~391

      /

      331~391

      681~102

      152~182

      8.0

      7.0

      CT81-10

      471~680

      /

      471~681

      122~182

      222~272

      10.0

      7.0

      CT81-12

      821~122

      /

      102

      222~332

      332~472

      12.5

      7.0

      CT81-14

      152~182

      /


      392

      562~682

      14.0

      7.0

      model and size code

      產品型號

      尺寸代碼

      VDC額定直流電壓

      Temperature characteristics溫度特性

      SIZE尺寸(mm)

      3B

      3E

      3F

      Dmax

      Tmax

      F

      d

      ±0.1

      Nominal capacitance標稱電容量

      CS1-05

      10V

      16V

      25V

      50V

      628~103

      103~333

      103~473

      5.5

      4.0

      5.0

      0.45

      CS1-06

      123~223

      303~473

      563~104

      6.5

      4.0

      5.0

      CS1-08

      333~503

      473~104

      104~154

      8.0

      4.0

      5.0

      CS1-10

      563~683

      823~104

      184~224

      10.0

      4.0

      5.0

      CS1-12

      823~104



      12.5

      4.0

      5.0

      CS1-05

      100V



      103~223

      5.5

      4.0

      5.0

      0.45

      CS1-06

      103~153

      223~333

      333~473

      6.5

      4.0

      5.0

      CS1-08

      203~223

      473~683

      563~104

      8.0

      4.0

      5.0

      CS1-10

      333~393

      823~104

      823~104

      10.0

      4.0

      5.0

      CS1-12

      473~683


      224

      12.5

      4.0

      5.0

      N0.

      item項目

       

      specitication試驗結果(規格值)

       

      Test method and test condition

      試驗條件


      7

      Temperature characteristic

      溫度特性

       

      NP0:(0±60 ppm/

      SL:(+140~-1000ppm/

      Temperature measurements in the following phase capacity value: (for T3 in base)

      在下列階段溫度測量容量值:基準T3

      step步驟 Temperature溫度T120±2℃T2-25±2℃T320±2℃T485±2℃T520±2℃

       


      8

      Robustness of terminations引出端強度

       

      tensile拉力

       

      S(mm)tensile拉力 0.35<S≤0.5>5N0.5<S≤0.8>10 N

       

      Fixed capacitor’body and Lead wire , lower lead wire.固定電容器本體和引腳,向下拉動引腳。

       


      Bending

      彎曲

       

      Lead wire shall not cut off.

      Capacitor shall not be broken.

      No visible damage.引線無斷裂,本體無損傷,無可見損傷

       

      Two times in a row in each direction bending, tension F=5N在每個方向上連續進行兩次彎曲,拉力F=5N

       


      9

      Resistance to soldering heat

      耐焊接熱

       

      Appearancecheck

      外觀檢查

      no visible damage,mark clear無可見損傷,標志清晰

       

      Without prior drying, welding method, lead insert t=1.6mm, diameter ф =1.0mm circuit boards, Tin 2mm

      不預先干燥,采用焊槽法,引線插入t=1.6mm,孔徑Ф=1.0mm電路板中,離錫面2mm

      Solder bath temperature焊錫溫度260±5℃Solder time焊錫時間5±0.5S

      Measurement of recovery for 24 ± 2 hours under standard conditions在標況下恢復24±2小時測量

       


      Capacitance change

      容量變化率

       

      NPO:±0.5%

      SL:±1%


      Insulation resistance絕緣電阻

      IR≥10000MΩ


      voltage proof

      耐電壓

      No permanent break-down or flashover during the test period

      無擊穿或飛弧

       

       




      N0.

      item項目

      specitication試驗結果(規格值)

      Test method and test condition

      試驗條件


      10

      solderability可焊性

       

      Good tinning as evidenced by free flowing of the solder with wetting of the terminations or solder shall flow within 3s.包錫良好,在3秒內流合。

       

      Without prior drying, welding method, lead insert t=1.6mm, diameter ф =1.0mm circuit boards, Tin 2mm

      不預先干燥,采用焊槽法,引線插入t=1.6mm,孔徑Ф=1.0mm電路板中,離錫面2mm

      Solder bath temperature焊錫溫度260±5℃Solder bath temperature焊錫時間2±0.5S

       


      11

      Rapid change of temperature

      (temperature cycling)

      溫度快速變化

      (溫度循環)

       

      No visible damage. mark clear.

      無可見損傷,標志清晰

       

      Following step 1 loop, loop 5 times

      以下步驟為1個循環,循環5次

      step步驟Temperature溫度Time時間1-25±2℃30minutes220±2℃3minutes385±2℃30minutes420±2℃3minutes

       


      12

      vibration振動

       

      No visible damage. mark clear.

      Capacitance: -20%≤ΔC/C≤+20%

      無可見損傷,標志清晰

      容量:-20%≤ΔC/C≤+20%

       

      frequency頻率

      10-55-10Hz 1minute

      amplitude of vibration振幅

      1.5mm

      direction方向:

      high and low,left and right, front and back side上下、左右、前后

      time時間:

      2hours

      condition狀態:

      sinusoidal wave正弦波振動


      13

      shock沖擊

       

      No visible damage. mark clear.

      Capacitance: -20%≤ΔC/C≤+20%

      外觀:標志清晰,本體無可見損傷

      容量:-20%≤ΔC/C≤+20%

       

      condition條件

      accelerated speed加速度:490m/s2

      pulse duration脈沖持續時間:11ms

      direction方向:X Y Z

      number of times次數:3times




      N0.

      Item

      項目

      specitication試驗結果(規格值)

       

      Test method and test condition

      試驗條件


      14

      Damp heat steady state

      穩態

      濕熱

       

      Appearance check

      外觀檢查

      No visible damage. mark clear.

      無可見損傷,標志清晰

      temperature溫度40±2℃Relative humidity相對濕度90%~95%time時間500(+24/-0)Hours

      Measurement of recovery for 24 ± 2 hours under standard conditions

      標況下恢復24±2小時后測量

       

      capacitance change

      容量變化率

      NP0:±2%max

      SL: ±3%max

      Dissipation factor

      損耗角正切

       

       

      Capacitance電容量QtgδC<30pF≥200+10C1/QC ≥30pF≥500≤0.002

       

      Insulation resistance

      絕緣電阻

      5000MΩmin

      15

      Damp heat steady state

      (charge)穩態濕熱

      (負荷)

       

      Appearance check

      外觀檢查

      No visible damage. mark clear.

      無可見損傷,標志清晰

      temperature溫度40±2℃Relative humidity相對濕度90%~95%Voltage電壓額定電壓Rated  voltagetime時間500(+24/-0)小時

      Measurement of recovery for 24 ± 2 hours under standard conditions

      標況下恢復24±2小時后測量

      capacitance change

      容量變化率

      NP0:±2%max

      SL: ±3%max

      Dissipation factor

      損耗角正切

       

       

      CAP.(C)QtgδC<30pF≥200+10C1/QC ≥30pF≥500≤0.002

       

      Insulation resistance

      絕緣電阻

      5000MΩmin

      16

      Endurance耐

       

      Appearance check

      外觀檢查

      No visible damage. mark clear.

      無可見損傷,標志清晰

      temperature溫度125±2℃Voltage電壓1.5URTime時間1000(+48/-0)hours

      Measurement of recovery for 24 ± 2 hours under standard conditions

      標況下恢復24±2小時內測量

       

      capacitance change

      容量變化率

      NP0:±3%max

      SL: ±5%max

      Dissipation factor

      損耗角正切

       

       

      Capacitance靜電容量QtgδC<30pF≥270+14C1/QC ≥30pF≥667≤0.0015

       

      Insulation resistance

      絕緣電阻

       

      5000MΩmin

      N0.

      Item

      項目

      Specitication

      試驗結果(規格值)

      Test method and test condition試驗條件

      1

      Operating temperature rang

      適用溫度范圍

       

      B、E、F、R

      -25~+85,Includes capacitors heating包括電容器自身發熱

      This continuous use temperature range

      可在此溫度范圍內連續使用

       

      X

      Includes capacitors heating -55~+125,包括電容器自身發熱

      2

      Appearance and size check

      外觀和尺寸檢查

       

      Component surfaces clean, as attachment, mark clear, no visible damage, dimensional compliance requirements

      元件表面清潔,無異物附著,標志清晰,

      無可見損傷,尺寸符合規定要求

      Visually inspect the product appearance

      Dimension checked  by calipers.目測檢查產品外觀

      尺寸用游標卡尺檢查

      3

      Capacitance

      電容量

      Within the scope of the permitted deviation level在允許的偏差等級范圍內

      Testing temperature

      溫度:25 ±3

      Testing frequency

      頻率:f=1KHz±20%

      Testing voltage

      電壓:1.0±0.1Vrms

       

      4

      Dissipation factor

      損耗角正切(tgδ)

      2B、2E、2X:tgδ≤2.5%

      LR、LB:  tgδ≤0.5%

      2F:  tgδ≤5.0%

      5

      Insulation resistance

      絕緣電阻

       

      IR≥4000MΩ

      Rated voltage額定電壓applied voltage測試電壓time時間current電流50、 500VUR60±5s≤0.05A1KV、2KV3KV、6KV500V60±5s≤0.05A

       

      6

      voltage proof耐電壓

       

      Between lead wire端子之間

       

      No permanent break-down or flashover during the test period

      無擊穿或飛弧

       

      Rated voltage額定電壓applied voltage測試電壓time時間current電流50、500V2.5UR1~5s≤0.05A1KV2UR1~5s≤0.05A2KV、3KV1.5UR+5001~5s≤0.05A6KV1.5UR1~5s≤0.05A

       

      Body insulation端子與外殼之間

       

      Used by metal balls, voltage application DC1500V testing 1-5s, charge and discharge current ≤ 0.05A

      使用金屬小球法,施加電壓DC1500V測試1-5s,充放電電流≤0.05A


      N0.

      Item

      項目

      Specitication

      試驗結果(規格值)

      Test method and test condition

      試驗條件

      7

      Temperature characteristic

      溫度特性

       

      2B:(-10%~+10%)

      2X:(-15%~+15%)

      LR:(-15%~+15%)

      2E:(-56%~+22%)

      2F: (-80%~+30%)

      LB:(-10%~+10%)

      Temperature measurements in the following phase capacity value: (for T3 in base)

      在下列階段溫度測量容量值:基準T3

      Step步驟Temperature溫度T120±2T2-25±2T320±2T485±2T520±2

       

      8

      Robustness of terminations引出端強度

       

      tensile拉力

       

      S(mm)Tensile拉力0.35<S≤0.5>5N0.5<S≤0.8>10 N

       

      Fixed capacitor’body and Lead wire , lower lead wire.

      固定電容器本體和引腳,向下拉動引腳。

       

      bending彎曲

       

      Lead wire shall not cut off.

      Capacitor shall not be broken.

      No visible damage.

      引線不斷裂

      電容器不被損傷

      無可見損傷

      Two times in a row in each direction bending, tension F=5N

      在每個方向上連續進行兩次彎曲,拉力F=5N

       

      9

      耐焊接熱

      Resistance to

      soldering heat

      Appearance check

      外觀檢查

      no visible damage

      無可見損傷,標志清晰

       

      Without prior drying, welding method, lead insert t=1.6mm, diameter ф =1.0mm circuit boards, Tin 2mm

      不預先干燥,采用焊槽法,引線插入t=1.6mm,孔徑Ф=1.0mm電路板中,離錫面2mm

      Solder bath temperature焊錫溫度260±5℃Solder time焊錫時間5±0.5S

      Measurement of recovery for 24 ± 2 hours under standard conditions

      在標況下恢復24±2小時測量

       

      Capacitance change

      容量變化率

       

      2B、2X :±10%max

      LR: ±15%max

      2E、2F:±20%max

      BN: ±10%max

      Insulation resistance絕緣電阻

      IR≥4000MΩ

      voltage proof

      耐電壓

       

      No permanent

       break-down or flashover during the test period

      無擊穿或飛弧

      10

      Solderability

      可焊性

       

      Good tinning as evidenced by free flowing of the solder with wetting of the terminations or solder shall flow within 3s.

      包錫良好,在3秒內流合。

       

      Without prior drying, welding method, lead insert t=1.6mm, diameter ф =1.0mm circuit boards, Tin 2mm

      不預先干燥,采用焊槽法,引線插入t=1.6mm,孔徑Ф=1.0mm電路板中,離錫面2mm

      Solder bath temperature焊錫溫度260±5℃Solder bath temperature焊錫時間2±0.5S


      N0.

      Item

      項目

      Specitication

      試驗結果(規格值)

      Test method and test condition

      試驗條件

      11

      Rapid change of temperature

      (temperature cycling)

      溫度快

      速變化

      (溫度循環)

       

      Appearance check

      No visible damage. mark clear.

      外觀檢查:

      無可見損傷,標志清晰

       

      Following step 1 loop, loop 5 times

      以下步驟為1個循環,循環5次

      step步驟Temperature溫度Time時間1-25±2℃30minutes220±2℃3minutes385±2℃2X:125±2℃30minutes420±2℃3minutes

       

      12

      Vibration

      振動

       

      Appearance check and measurement:

      No visible damage. mark clear.

      Capacitance:-20%≤ΔC/C≤+20%

      最后檢查、測量和要求:

      無可見損傷,標志清晰

      容量:-20%≤ΔC/C≤+20%

       

      frequency頻率

      10-55-10Hz 1minute

      amplitude of vibration振幅

      1.5mm

      direction方向:

      high and low,left and right, front and back side上下、左右、前后

      time時間:

      2hours

      condition狀態:

      sinusoidal wave正弦波振動

      13

      Shock

      沖擊

       

      Appearance check and measurement:

      No visible damage. mark clear.

      Capacitance:-20%≤ΔC/C≤+20%

      最后檢查、測量和要求:

      外觀:標志清晰,本體無可見損傷

      容量:-20%≤ΔC/C≤+20%

       

      condition條件

      accelerated speed加速度:490m/s2

      pulse duration脈沖持續時間:11ms

      direction方向:X Y Z

      number of times次數:3times

      N0.

      Item

      項目

      Specitication

      試驗結果(規格值)

      Test method and test condition

      試驗條件


      14

      Damp heat steady state

      穩態

      濕熱

       

      Appearance check

      外觀檢查

      No visible damage. mark clear.

      無可見損傷,標志清晰

      temperature溫度40±2℃Relative humidity相對濕度90%~95%Time時間500(+24/-0)Hours

      Measurement of recovery for 24 ± 2 hours under standard conditions

      標況下恢復24±2小時后測量

       

      capacitance change

      容量變化率

      2B、2X:±10%max

      LR、LB:±15%max

      2E:±20%max

      2F:±30%max

      Dissipation factor

      損耗角正切

       

      2B、2X:0.050max

      2E、2F:0.070max

      LR、LB:0.070max

      Insulation resistance絕緣電阻

      2000MΩmin

      15

      Damp heat steady state

      (charge)穩態濕熱

      (負荷)

       

      Appearance check

      外觀檢查

      No visible damage. mark clear.

      無可見損傷,標志清晰

      temperature溫度40±2℃Relative humidity相對濕度90%~95%Voltage電壓Rated voltage額定電壓 Time時間500(+24/-0)小時

      Measurement of recovery for 24 ± 2 hours under standard conditions

      標況下恢復24±2小時后測量

      capacitance change

      容量變化率

      2B、2X:±10%max

      LR、LB:±15%max

      2E:±20%max

      2F:±30%max

      Dissipation factor

      損耗角正切

       

      2B、2X:0.050max

      LR、2E、2F:0.070max

      BN:0.070max

      Insulation resistance絕緣電阻

      2000MΩmin

      16

      Endurance

      Appearance check

      外觀檢查

      No visible damage. mark clear.

      無可見損傷,標志清晰

       

      temperature溫度125±2℃(2X)85±2℃(2B 2R 2E 2F BN)Voltage電壓 1.5倍額定電壓時間time1000(+48/-0)小時

      Measurement of recovery for 24 ± 2 hours under standard conditions

      標況下恢復24±2小時內測量

       

      capacitance change

      容量變化率

      2B、2X、LR、2E:±20%max

      2F: ±30%max

      LB:±20%max

      Dissipation factor

      損耗角正切

       

      2B、2X:0.050max

      LR、2E、2F:0.070max

      LB:0.070max

      Insulation resistance絕緣電阻

      2000MΩmin

      N0.

      Item

      項目

      Specitication

      試驗結果(規格值)

      Test method and test condition試驗條件

      1

      Operating temperature rang

      適用溫度范圍

      Includes capacitors heating -25~+85,包括電容器自身發熱

      This continuous use temperature range

      可在此溫度范圍內連續使用

      2

      Appearance and size check

      外觀和尺寸檢查

       

      Component surfaces clean, as attachment, mark clear, no visible damage, dimensional compliance requirements

      元件表面清潔,無異物附著,標志清晰,

      無可見損傷,尺寸符合規定要求

      Visually inspect the product appearance

      Dimension checked  by calipers.目測檢查產品外觀

      尺寸用游標卡尺檢查

      3

      Capacitance

      電容量

      Within the scope of the permitted deviation level在允許的偏差等級范圍內

      Testing temperature

      溫度:25 ±3

      Testing frequency

      頻率:f=1KHz±20%

      Testing voltage

      電壓:0.1±0.05Vrms

       

      4

      Dissipation factor

      損耗角正切(tgδ)

      3B、3E、3F:(tgδ)≤5.0%

      5

      Insulation resistance

      絕緣電阻

       

      10V≤UR≤25V:

      IR≥100MΩ

      UR>25V:

      IR≥1000MΩ

      Rated voltage額定電壓applied voltage測試電壓time時間current電流10~100VUR60±5s≤0.05A

       

      6

      voltage proof耐電壓

       

      Between lead wire端子之間

       

      No permanent break-down or flashover during the test period

      無擊穿或飛弧

       

      Rated voltage額定電壓applied voltage測試電壓time時間current電流50V1.5UR1~5s≤0.05A100V1.5UR1~5s≤0.05A

       

      Body insulation端子與外殼之間

       

      Used by metal balls, voltage application DC150V testing 1-5s, charge and discharge current ≤ 0.05A使用金屬小球法,施加電壓DC150V測試1-5s,充放電電流≤0.05A


      N0.

      Item

      項目

      Specitication

      試驗結果(規格值)

      Test method and test condition

      試驗條件

      7

      Temperature characteristic

      溫度特性

       

      3B:(-10%~+10%)

      3E:(-56%~+22%)

      3F:(-82%~+22%)

      Temperature measurements in the following phase capacity value: (for T3 in base)

      在下列階段溫度測量容量值:基準T3

      Step步驟Temperature溫度T120±2T2-25±2T320±2T485±2T520±2

       

      8

      Robustness of terminations引出端強度

       

      tensile拉力

       

      S(mm)Tensile拉力0.35<S≤0.5>5N0.5<S≤0.8>10 N

       

      Fixed capacitor’body and Lead wire , lower lead wire.

      固定電容器本體和引腳,向下拉動引腳。

       

      bending彎曲

       

      Lead wire shall not cut off.

      Capacitor shall not be broken.

      No visible damage.

      引線不斷裂

      電容器不被損壞

      無可見損傷

      Two times in a row in each direction bending, tension F=5N

      在每個方向上連續進行兩次彎曲,拉力F=5N

       

      9

      Resistance to

      soldering heat

      耐焊接熱

       

      Appearance check

      外觀檢查

      no visible damage

      無可見損傷,標志清晰

      Without prior drying, welding method, lead insert t=1.6mm, diameter ф =1.0mm circuit boards, Tin 2mm

      不預先干燥,采用焊槽法,引線插入t=1.6mm,孔徑Ф=1.0mm電路板中,離錫面2mm

      Solder bath temperature焊錫溫度260±5℃Solder time焊錫時間5±0.5S

      Measurement of recovery for 24 ± 2 hours under standard conditions

      在標況下恢復24±2小時測量

       

      Capacitance change

      容量變化率

       

      3B:±10%max

      3E、3F、±20%max

      Insulation resistance絕緣電阻

      IR≥100MΩ

      voltage proof

      耐電壓

      Within the scope of the initial specifications

      在初期規格范圍之內

      10

      可焊性

      solderability

      包錫良好,在3秒內流合。

      Good tinning as evidenced by free flowing of the solder with wetting of the terminations or solder shall flow within 3s.

      不預先干燥,采用焊槽法,引線插入t=1.6mm,孔徑Ф=1.0mm電路板中,離錫面2mm

      Without prior drying, welding method, lead insert t=1.6mm, diameter ф =1.0mm circuit boards, Tin 2mm

      焊錫溫度Solder bath temperature235±5℃焊錫時間Solder bath temperature2±0.5S


      N0.

      Item

      項目

      Specitication

      試驗結果(規格值)

      Test method and test condition

      試驗條件

      11

      Rapid change of temperature

      溫度快

      速變化

      (溫度循環)

       

      Appearance check

      No visible damage. mark clear.

      外觀檢查:

      無可見損傷,標志清晰

       

      Following step 1 loop, loop 5 times

      以下步驟為1個循環,循環5次

      step步驟Temperature溫度Time時間1-25±2℃30minutes220±2℃3minutes385±2℃30minutes420±2℃3minutes

       

      12

      Vibration

      振動

       

      Appearance check and measurement:

      No visible damage. mark clear.

      Capacitance:-20%≤ΔC/C≤+20%

      最后檢查、測量和要求:

      無可見損傷,標志清晰

      容量:-20%≤ΔC/C≤+20%

       

      frequency頻率

      10-55-10Hz 1minute

      amplitude of vibration振幅

      1.5mm

      direction方向:

      high and low,left and right, front and back side上下、左右、前后

      time時間:

      2hours

      condition狀態:

      sinusoidal wave正弦波振動

      13

      Shock

      沖擊

       

      Appearance check and measurement:

      No visible damage. mark clear.

      Capacitance:-20%≤ΔC/C≤+20%

      最后檢查、測量和要求:

      外觀:標志清晰,本體無可見損傷

      容量:-20%≤ΔC/C≤+20%

       

      condition條件

      accelerated speed加速度:490m/s2

      pulse duration脈沖持續時間:11ms

      direction方向:X Y Z

      number of times次數:3times

      N0.

      Item

      項目

      Specitication

      試驗結果(規格值)

      Test method and test condition

      試驗條件


      14

      Damp heat steady state

      穩態

      濕熱

       

      Appearance check

      外觀檢查

      No visible damage. mark clear.

      無可見損傷,標志清晰

      temperature溫度40±2℃Relative humidity相對濕度90%~95%Time時間500(+24/-0)Hours

      Measurement of recovery for 24 ± 2 hours under standard conditions

      標況下恢復24±2小時后測量

       

      capacitance change

      容量變化率

      3B:±10%max

      3E、3F:±20%max

      Dissipation factor

      損耗角正切

      3B:0.07 max

      3E、3F:0.1max

      Insulation resistance絕緣電阻

      100MΩmin

      15

      Damp heat steady state

      (charge)穩態濕熱

      (負荷)

       

      Appearance check

      外觀檢查

      No visible damage. mark clear.

      無可見損傷,標志清晰

      temperature溫度40±2℃Relative humidity相對濕度90%~95%Voltage電壓Rated voltage額定電壓Time時間500(+24/-0)小時

      Measurement of recovery for 24 ± 2 hours under standard conditions

      標況下恢復24±2小時后測量

       

      capacitance change

      容量變化率

      3B:±10%max

      3E、3F:±20%max

      Dissipation factor

      損耗角正切

       

      3B:0.07 max

      3E、3F:0.1max

      Insulation resistance絕緣電阻

      100MΩmin

      16

      Endurance耐

       

      Appearance check

      外觀檢查

      No visible damage. mark clear.

      無可見損傷,標志清晰

      temperature溫度85±2℃Voltage電壓1.5 times rated voltage 1.5倍額定電壓Time時間1000(+48/-0)hurs

      Measurement of recovery for 24 ± 2 hours under standard conditions

      標況下恢復24±2小時內測量

       

      capacitance change

      容量變化率

      3B、3E、3F:±20%max

      Dissipation factor

      損耗角正切

      3B:0.07max

      3E、3F:0.1max

      Insulation resistance絕緣電阻

      100MΩmin



      亚洲无线一二三四区手机_国产丝袜精品丝袜一区二区三区_91chinese永久免费_亚洲一区成人